Best ramp brackets for 2020
When it comes to choosing your ramp brackets, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best ramp brackets. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best ramp brackets.
When it comes to choosing your ramp brackets, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best ramp brackets. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best ramp brackets.
Best ramp brackets
1. Lund 602002 Ramp Kit for 2" X 8" to 2" x 10" Wood Planks
Feature
Attaches to ordinary 2" x 8" or 2" x 10" wood planks to make an economical set of loading rampsAll hardware included to make a pair of ramps
Made in the USA and backed by a limited lifetime warranty
Description
Lund's ramp kit turns ordinary 2" x 8" or 2" x 10" wood planks into an economical set of ramps. This easy to install ramp kit includes all the hardware needed to make two ramps.2. MaxxHaul 80439 Aluminum Ramp Top Kit
Feature
Turns your 2" x 8" boards into a sturdy, all-purpose utility ramps for loading your trailer, truck, shed and moreConstructed from heavy duty extruded aluminum that will provide years of service
Equipped with protective pads to protect your tailgate
Features non-skid top surface for improved traction
Includes mounting hardware to make installation fast and easy
Description
Our MaxxHaul aluminum ramp top kit has a width of 8" for each ramp and maximum capacity of 1400 lbs (700 lbs each). This top kit features duty aluminum construction for durability. Each ramp is designed to turn 2" x 8" boards intol all-purpose ramps. Includes protective pads that will help prevent scratching your tailgate. Non-skid top surface is designed to prevent slipping and increase traction.3. AFA Tooling Wide Truck Ramps - 8-inch Aluminum Quick Truck Ramp Kit by AFA Tooling
Feature
QUICK-RAMPS - Turn ordinary 1.37" x 7" (common 2" x 8") boards actual into an inexpensive, all-purpose truck ramps with these high-strength bracketsANTI-SLIP FEET - With 2 premium anti-slip rubber feet these ramps safely stay put even while loading the heaviest vehicles
8-INCH WIDE TRACKS - With extra width these truck ramps make loading your snowmobiles, four wheelers or ATVs on to your truck bed quick and easy
COMPLETE RAMP KIT - Your Approved For Automotive includes all the hardware needed for two sturdy ramps that hold 750 lbs. [335 kg] each or 1500 lbs. [675 kg], add them with your 1.37" x 7" (common 2" x 8") boards for a fast DIY solution
LIGHT WEIGHT & STRONG - Weighing in at under 7lbs these heavy duty aluminum brackets are easy to handle and stow - making set up a one-person operation
Description
Professional grade quick-ramps by Approved for Automotive are the quickest heavy duty solution for truck ramps that are sturdy and stable - giving you peace of mind, even under the heaviest loads.Simply attach the 2 aluminum top plates and 2 anti-slip rubber feet to your lumber to create a truck bed ramp that won't slip or slide as you load. Snug the ramps to your truck bed, then adjust width for just about any size load - wide for ATVs, snowmobiles & tractors, or close together for motorcycles.
Your complete DIY quick ramp kit includes:
2 - 7" x 8" [180 x 205 mm] plates
2 - 7.3" x 3.9" [187 x 100 mm] feet
All required hardware
You have everything you need to turn ordinary 1.37" x 7" (common 2" x 8") boards into two sturdy trucks ramps in just minutes. Plus, with a load capacity of 750 lbs. [335 kg] each or 1500 lbs. [675 kg] combined, you have more than enough support to quickly and safely load even your heaviest gear.
4. AFA Tooling Wide Truck Ramps - 12-inch Aluminum Quick-Ramp Kit
Feature
QUICK-RAMPS - Turn ordinary 1.37" x 11" (common 2" x 12") boards into an inexpensive, all-purpose truck ramps with these high-strength bracketsANTI-SLIP FEET - With 2 premium anti-slip rubber feet these ramps safely stay put even while loading the heaviest vehicles
12-INCH WIDE TRACKS - With extra width these truck ramps make loading your snowmobiles, four wheelers or ATVs on to your truck bed quick and easy.
COMPLETE RAMP KIT - Your Approved For Automotive includes all the hardware needed for two sturdy ramps that hold 1000 lbs. [453 kg] each or 2000 lbs. [906 kg], add them with your 1.37" x 11" (common 2" x 12") boards for a fast DIY solution
LIGHT WEIGHT & STRONG - Weighing in at under 7lbs these heavy duty aluminum brackets are easy to handle and stow - making set up a one-person operation
Description
Professional grade Quick-Ramps by Approved for Automotive are the quickest heavy duty solution for truck ramps that are sturdy and stable - giving you peace of mind, even under the heaviest loads.Simply attach the 2 aluminum top plates and 2 anti-slip rubber feet to your lumber to create a truck bed ramp that won't slip or slide as you load. Snug the ramps to your truck bed, then adjust width for just about any size load - wide for ATVs, snowmobiles & tractors, or close together for motorcycles.
Your complete DIY Quick Ramp Kit includes:
2 - 10.6" x 8" plates [270 x 205mm]
2 - 11.2" x 3.9" [285 x 100mm] feet
All required hardware
You have everything you need to turn ordinary 1.37" x 11" (common 2" x 12") boards into two sturdy trucks ramps in just minutes. Plus, with a load capacity of 1000 lbs. [453 kg] each or 2000 lbs. [906 kg] combined, you have more than enough support to quickly and safely load even your heaviest gear.
5. KEEPER 05674 Ramp Kit with Hardware
Feature
Ramp kit pair, with hardware2" x 8" heavy duty aluminum ramp ends
Use with 2 X 8 or 2 X 12 lumber
Can be used on all trucks
Lumber not included
6. InstaRamp Steel Top Brackets - 8in., Model# RAMP-1
Feature
Two (2) 8-inch,solid-steel ramp top.Includes all hardware needed to make two (2) ramps.
Assembles in minutes. Ramp Top Dimensions: 7-1/4 in. x 9-1/4 in.
Skid-proof and mar-resistant pads included.
Epoxy-coated for rust resistance.
7. BISupply Aluminum Ramp Kit 8in Truck Ramp Brackets and Rubber Feet, Tailgate Ramp Kit Ramp Plate Kit
Feature
BUILD YOUR OWN RAMPS: Use the BISupply Aluminum Truck Ramps Loading Ramp Kit to turn simple 2 by 8-inch (5.1 by 20.3 cm) boards into sturdy, all-purpose utility trailer ramps; Each package of ramp parts includes 2 aluminum loading ramps, 2 rubber anti-slip loading ramp ends, and installation hardware to assist in constructing a total of (2) ramps; 2-inch by 8-inch ramp boards required (not included); Kit weighs just under 6 pounds for easy storage, installation, and handlingDURABLE ALUMINUM RAMP PLATES: Constructed of quality aluminum material ensures that these load ramps are designed for maximum strength and durability; Loading ramp brackets provide reliable stability and resistance to rust and corrosion; Features a 1.37-inch (3.5 cm) board insert space, non-skid threads on the 5 by 7.25-inch (12.7 by 18.4 cm) faceplate, and pre-screwed bolt holes
ANTI-SLIP FEET: Forget about cutting angles to make your ramps sit flat, simply slide one of these 4 by 7.5-inch (10.2 by 19.1 cm) rubber ramp ends for boards on the end of the board and you are ready to load up anything; Anti-slip rubber feet help to hold your ramp in place while loading up your toys
MAXIMUM CAPACITY MEETS YOUR NEEDS: Each set of truck ramp kits has a maximum load capacity of 700 lbs. (317 kg) each, while combined these ATV ramps can handle up to 1400 lbs. (635 kg); With this much support, you can quickly and safely load, secure, tow, and organize your motorcycles, motocross bikes, wagons, wheel barrels, and bicycles into a storage shed, truck bed, or trailer
EASY TO INSTALL: Using the included hardware, attach the 2 aluminum top plates to one end of your 2x8 lumber board; Slide the anti-slip rubber feet to the other end; Place the top plates on the edge of the tailgate and adjust the distance between the ramps based on your load size; Extra holes in the top plate allows you to drill the ramp into place on your tailgate for a more secure hold
8. BISupply Aluminum Ramp Kit 12in Truck Ramp Brackets and Rubber Feet, Tailgate Ramp Kit Ramp Plate Kit
Feature
BUILD YOUR OWN RAMPS: Use the BISupply Aluminum Truck Ramps Loading Ramp Kit to turn simple 2 by 12-inch (5.1 by 30.5 cm) boards into sturdy, all-purpose utility trailer ramps; Each package of ramp parts includes 2 aluminum loading ramps, 2 rubber anti-slip loading ramp ends, and installation hardware to assist in constructing a total of (2) ramps; 2-inch by 12-inch ramp boards required (not included); Kit weighs just under 9 pounds for easy storage, installation, and handlingDURABLE ALUMINUM RAMP PLATES: Constructed of quality aluminum material ensures that these load ramps are designed for maximum strength and durability; Loading ramp brackets provide reliable stability and resistance to rust and corrosion; Features a 1.37-inch (3.5 cm) board insert space, non-skid threads on the 5.4 by 11-inch (13.7 by 27.9 cm) faceplate, and pre-screwed bolt holes
ANTI-SLIP FEET: Forget about cutting angles to make your ramps sit flat, simply slide one of these 4 by 11-inch (10.2 by 27.9 cm) rubber ramp ends for boards on the end of the board and you are ready to load up anything; Anti-slip rubber feet help to hold your ramp in place while loading up your toys
MAXIMUM CAPACITY MEETS YOUR NEEDS: Each set of truck ramp kits has a maximum load capacity of 700 lbs. (317 kg) each, while combined these ATV ramps can handle up to 1400 lbs. (635 kg); With this much support, you can quickly and safely load, secure, tow, and organize your motorcycles, motocross bikes, wagons, wheel barrels, bicycles, snowmobiles, four wheelers, and ATVs into a storage shed, truck bed, or trailer
EASY TO INSTALL: Using the included hardware, attach the 2 aluminum top plates to one end of your 2x12 lumber board; Slide the anti-slip rubber feet to the other end; Place the top plates on the edge of the tailgate and adjust the distance between the ramps based on your load size; Extra holes in the top plate allows you to drill the ramp into place on your tailgate for a more secure hold
9. bROK 12" Aluminum Ramp Kit for 2" x 12" Planks with Full Width scratchproof Pads. Create Universal Wood Plank ramps to Load and unload Lawn Tractors, ATVs, dolleys, and wheelbarrows
Feature
Aluminum Ramp Kit to COMMAND the task of loading your essentialsCONFIDENTLY turn your 2" x 8" planks into ramps to transport up to 700 lbs of your essentials with full width slip resistant traction ribs
PROTECT your paint finish with the included scratch proof pads
QUICKLY create ideal length ramps with the included hardware and your wood planks
PROTECT your investment with high quality solid aluminum ends, scratch proof pads and steel hardware.
10. Smartxchoices Pair 7.5' Folding Truck Ramps Aluminum Trailer Loading Ramps w/Straps for ATV UTV Motorcycle Snow Blower Lawn Mower Pickup 1500lb Capacity
Feature
High Quality & Large Weight CapacityThis heavy duty loading ramps set is manufactured from high-strength while lightweight aluminum, which is easy to maneuver and handle loads up to 750 lbs. per ramp(1500lb Capacity in total). Providing a greater traction and making it easy to load and unload..Practical Uses & Labor-SavingEasy to load various motorcycles and dirt bikes with this loading ramp supporting your favorite ride. A pair set suitable for ATV & UTV, lawn mower, truck, motorcycle, trailers,tiller, dirt bike and garden tractor and other smaller wheeled tools.
Arched Shape & More SecureArched design for better load bearing capacity and soft tipped design reduces abrasion between your ride and the ramp. There are 3 caps at the bottom of the loading ramp, which will keep it from slipping and makes much safer and more stable when loading.
Anti-slip Feet & Rust ProtectionThe durable aluminum material makes the ramp more light and not easy to get rusty. It can be used easily both indoors and outdoors, no worries about the mud in rainy days, simple operation and convenience washing.
Folding Design with Safety StrapsUnfolded Dimension: 89.3 x 11.6"(LxW); Folded Dimension: 45.6 x 11.6"(LxW). No assembly is needed. Unfold and go. The included adjustable safety straps offer secure loading, when not in use, these ramps fold in half for easy storage in your garage or vehicle. Please contact the seller if you have any problems with them.